Brock® Bucket Elevator Accessories

Brock Gravity Take-Up Boot
Brock Gravity Take-Up Boot
Brock Explosion Relief Panel
Brock Explosion Relief Panel
Brock Pulley Lagging
Brock Pulley Lagging
Dura-Splice – Durable Belt Fastener with “one size fits all” belts and pulleys. Each splice set joins a 2-inch (50.8-mm) wide belt area.

Elevator Head and Legging Explosion Relief Panels – Relief panels release pressure from possible explosion. Safety cable prevents panel from falling.

Elevator Belt Speed Monitor – The speed monitor mounts to the elevator boot shaft to detect slowdown in belt speed, indicating a plug situation. Available in single set point and dual set point, less control cable.

Bucket Attachment Hardware – #1 Norway Elevator bucket bolts with nuts are sold (in quantities of 100) in 1-inch (25.4-mm) through 2-inch (50.8-mm) long, standard and fanged variety along with 1/4-inch (6.4-mm) and 5/16-inch (7.9-mm) lock washers, flat washers and hex nuts are available.

Elevator Boot Hopper Magnet Option – High intensity magnet is mounted in elevator boot hopper to remove tramp metal. Quick release clamps allow for easy cleaning.

Elevator Belting – PVC (standard) or rubber (optional) belts are available.

Elevator Buckets – Polyethylene buckets standard. Metal, urethane or nylon buckets are optional. Bucket venting optional for fine or light weight products.

Urethane Liners – High quality urethane liners with expanded metal backing are available in: 1/4-inch (6.4-mm) urethane, 1/4-inch (6.4-mm) ceramic chip urethane or 5/16-inch (7.9-mm) high energy urethane.

Motors – Motors up to 150 horsepower are available from stock. Motors are 1725-1800 RPM 60 Hz and 1450 RPM 50 Hz, three phase. Enclosures are TEFC or Explosion Proof, Class II, Group G.

Boot Shovel Hopper – A boot shovel hopper is available on all Brock bucket elevators. The shovel hopper has a hinged cover and a grate over the opening. The shovel hopper is located on the down leg side.

Boot Pulleys
– Elevator pulleys are available in drum, winged and spiral winged styles.

Pulley Lagging
– Heavy-duty slide lagging (SOF Style 5) slides into retainers which are welded onto the pulley.

Gravity Take-Up Boot – Gravity take-up for automatic belt tension is available on all Brock bucket elevators. Included is a weight box and alignment bolts for tracking the elevator belt.

Self-Cleaning Boot
– Self-cleaning boot holds close clearance between boot bottom and cups at all times.

Bucket Elevator Machinery Arm – Mounts directly to head section. Available in 1,000-lb. (454-kg) and 1,500 lb. (681 kg) capacities.
  • Literature