Brock's HARVEST-TIME® U-Trough Unloading System. | 
Brock's optional WELL-GARD® Discharge Guard (patent pending) can be added to the HARVEST-TIME® System's power sweep to help limit bridging or blocking of the center well opening. | 
Cross Section View of HARVEST-TIME® 10-inch (254-mm) U-Trough Auger System. | 
Brock's HARVEST-TIME® U-Trough System conveniently fits under Brock's TRI-CORR® Floor and PARTHENON® Low Floor Supports. | 
The HARVEST-TIME® U-Trough System's extra large center well features wear-resistant slide gate rollers. | 
The HARVEST-TIME® System's 7-gauge auger flight is easily removed and reinstalled from outside the bin. | 
Power head discharge unit for the HARVEST-TIME® System. | 
Sturdy flange connections join the HARVEST-TIME® System's U-trough auger sections. | 
Reliable 3-belt pulley is a part of the auger drive. Also shown is the hinged belt guard for ease of maintenance and 4-point motor mount with belt-tension adjustment. | | view all photos |
Offers 40% More Capacity Than 10-Inch Auger Tube Systems Brock’s HARVEST-TIME® 10-Inch (254-mm) U-Trough Auger and Power Sweep Unloading System with a capacity of up to 7,800 bushels (198 metric tons) of corn per hour offers you up to 40% more grain moving capacity than 10-inch (254-mm) diameter tube systems. It’s a heavy-duty system you can grow with, plus get the same great advantages offered by Brock’s
HARVEST-TIME Tube Auger Unloading System: - Smooth-working unloader and sweep combination that can be operated from outside the bin, or
- An unloader that can be used with a center pivot to connect to an existing portable sweep.
Other HARVEST-TIME U-Trough features include: - Available for 36- through 60-foot (11 to 18.3 m) diameter bins.
- Available with horizontal power heads only.
- Rack & pinion controls for sweep and discharge wells are conveniently located together outside of the bin.
- Extra large center well easily adjusts to control output.
- Intermediate well.
- Optional HARVEST-TIME® Power Sweep can be added at a later time if desired.
- Painted hoppers and power heads.
- 14-gauge galvanized steel u-trough sections.
- 4-point motor mount also offers belt tension adjustment.
- Hinged belt guard for ease of maintenance.
NOTE: This unloading system’s output quickly and easily adjusts to match your existing transfer system – maximum output requires 8,000 BPH transfer auger.
|
(1.43Mb)