Brock's WELL-GARD® Discharge Guard for on-farm grain bins. | 
Brock's WELL-GARD® Discharge Guard for use in commercial grain bins. | 
Brock’s WELL-GARD® Discharge Guard for use with Brock's HARVEST-TIME Bin Sweep and Unloading Systems. Guard mounts directly to sweep. | 
Cuts or breaks up chunks of grain threatening to block discharge well. Allows grain to flow around chunks of grain that will not break up, moving chunks away from well opening. | 
When attached to the HARVEST-TIME® Sweep, Brock’s optional WELL-GARD® Unit simply rotates with the sweep so removal of the discharge guard is not necessary during sweep use. | | view all photos |
Keep the Grain Flowing Brock’s unique WELL-GARD® Discharge Guard will help insure a continuous flow of grain out of the bin – even grain containing frozen or compacted chunks. By guarding the entire area of the well opening, the WELL-GARD Guard limits the bridging and blockage caused by these chunks of grain. Brock's WELL-GARD System: - Is designed to cut up or break up chunks threatening to block the discharge well of the bin.
- The pyramid-shaped guard is also engineered to stop chunks that will not break up, allowing grain to continue flowing around the chunk and into the well.
- WELL-GARD is constructed of heavy-gauge, galvanized steel for a long, rust-resistant life.
- The guard attaches to the discharge well to prevent dislodging during the filling of the bin. Yet, the guard can easily be removed to permit the installation of a sweep auger.
WELL-GARD – it’s a unique, simple, inexpensive solution to a potentially serious and annoying grain handling problem.
Works with HARVEST-TIME® Sweeps, Too! Brock’s unique WELL-GARD® Discharge Guard also mounts directly to Brock’s HARVEST-TIME® Sweep. This helps to maintain a continuous flow of grain out of the bin while eliminating bin entry to install the sweep or remove the well discharge guard. By guarding the entire area of the well opening from the top of the sweep, the WELL-GARD Unit helps ensure zero-bin entry and limits bridging and blockage caused by chunks of grain. - Save time and labor, and improve safety – no entering the bin to break up blockages.
- Install the WELL-GARD unit and Sweep before loading the bin – no further need for bin entry as the bin empties.
|
(439kb)